建設のための(J)ZQ 250から1000シリーズソフトギア表面ギアボックス
- 原産地:
-
江蘇省、中国(本土)
- ブランド名:
-
DEVO
- ギアリングアレンジメント:
-
拍車
- 出力トルク:
-
26.5〜209 KN.m
- 入力スピード:
-
600〜1500rpmで
- 出力速度:
-
12〜810 rpmで
- 商品名:
-
(J)ZQシリーズギアボックス
- ハウジング材質:
-
鋳鉄
- ギア材質:
-
45#スチール
- ギアアレンジメント:
-
拍車
- 取り付け位置:
-
水平方向の足moedtnu
- アプリケーション:
-
建設
- 品質管理システム:
-
ISO 9001
- 保証:
-
1年
- 色:
-
赤、緑、またはカスタマイズ
- パッキング:
-
木箱
包装&配達
- ユニットの販売:
- 単品
- シングルパッケージサイズ:
- 130X90X70 cm
- シングル総重量:
- 800.0キロ
- :
-
数量(ピース) 1から10 > 10 EST(東部基準時。 時間(日) 15 交渉されるべき
製品のご紹介
gearboxsの他のモデルと比較し、(J)ZQシリーズは、小さな測定の機能、負荷、高効率、ノイズの低い体積の巨大な容量を所有しています。 重産業機械に使用され、製品は出力速度を低減し、出力トルクを増幅するのに優れています。 操作の段階では、製品はcaburization及び消光の生産加工にギヤ由来する信頼性の高い安定性の特徴を示すであろう。
(J)ZQのパラメータテーブル
寸法図および(J)ZQシリーズのテーブル
使用とメンテナンス
(1) The lubricating oil should be filled into the oil tank of the housing which is between the two oil screws; when the
filling is finished, the reductor could run with load upon the only condition that the stability of operating is confirmed
機器の後しばらくの間、無負荷で動作します。
(2) The suitable brand of the lubricating oil: 150 # industrial gear oil being used in the summer 120 # industrial gear oil
being used in the winter; if the industry gear oil above are in lack of, both the 50# gear oil in summer and the 40# gear
冬に油を代わりに使用することができます。
(3) The inside of the reductor should be washed once at least within the first six months after it being used and then
潤滑油が補充する必要があります。
(4) The reductor under the circumstance of normal operation should be maintained regularly. According to the
動作条件と具体的な状況は、徹底したメンテナンスは、すべての6〜12ヶ月に実装されなければなりません。
Below come the details of the maintenance: Open the cover board of the peephole, then check the state of friction of
every gear. The lubricating oil should be checked carefully, if the emulsification of the lubricating oil is being
discovered, the whole emulsion oil must be drained out and the gears should be washed by light oil, finally refill the
新しいオイルを収容します。
If the reductor doesn’t restore to work right away, then the oil extractor has to operate 10 minutes at least which
保証潤滑膜が還元剤のギアやベアリングの表面上に発信されます。
(5) If the bearings are lubricated with the grease, the type ZL-3 should be used in the summer and the ZL-2 lithium grease should be used in the winter, the grease should be refilled every six month.