ZDY Series 1 stage ZDY 560 hardened gear surface cylindrical reductor for metallurgy industry

Short Description:

Product Detail

Product Tags

Overview
Quick Details
Place of Origin:
Jiangsu, China (Mainland)
Brand Name:
DEVO
Gearing Arrangement:
Cylindrical gear
Output Torque:
0.36-154.6 KN.m
Input Speed:
750-1500 rpm
Output Speed:
134 -1200 rpm
Product name:
ZDY Series Reductor
Housing material:
cast iron
Material of bearing:
steel
Heat treatment:
Quenching
Mount Position:
Horizontal
Application:
Metallurgy
Warranty:
1 Year
Certification:
ISO9001
Packing:
Wooden Case
Color:
Red, Green, Blue or customized

Packaging & Delivery

Selling Units:
Single item
Single package size: 
150X83X141 cm
Single gross weight:
3730.0 kg

Lead Time :
Quantity(Piece) 1 – 10 >10
Est. Time(days) 15 To be negotiated

Product Description

Introduction of the ZDY series

ZDY Series One stage surface hardened Cylindrical Gear Gearbox,  are suitable for high-speed axle with a speed less than or equal to 1500 rpm. The gearbox has a hard tooth surface with thrust bearing and very high precision. With the features of using alloy steel with high strength to produce its accessories such as gears and axle. 

Parameter table of ZDY series products

Dimension figure of ZDY series

Use and maintenance

(1) The lubricating oil should be filled into the oil tank of the housing which is between the two oil screws; when the
filling is finished, the reductor could run with load upon the only condition that the stability of operating is confirmed
after the equipment runs without load for a while.
(2) The suitable brand of the lubricating oil: 150 # industrial gear oil being used in the summer 120 # industrial gear oil
being used in the winter; if the industry gear oil above are in lack of, both the 50# gear oil in summer and the 40# gear
oil in winter can be used instead.
(3) The inside of the reductor should be washed once at least within the first six months after it being used and then
the lubricating oil should be refilled.
(4) The reductor under the circumstance of normal operation should be maintained regularly. According to the
operating conditions and concrete situations, a thorough maintenance should be implemented every 6 to 12 month.
Below come the details of the maintenance: Open the cover board of the peephole, then check the state of friction of
every gear. The lubricating oil should be checked carefully, if the emulsification of the lubricating oil is being
discovered, the whole emulsion oil must be drained out and the gears should be washed by light oil, finally refill the
housing the new oil.
If the reductor doesn’t restore to work right away, then the oil extractor has to operate 10 minutes at least which
assurances the lubricating film being originated on the surface of gears and bearings of the reductor.
(5) If the bearings are lubricated with the grease, the type ZL-3 should be used in the summer and the ZL-2 lithium grease should be used in the winter, the grease should be refilled every six month. 

Profile of company
Application Field
Packing and Delivery
Packing
Size (cm)
50 (L) * 50 (W) * 50 (D)
Weight(T)
1.2 T
Packing
Details
The normal package is wooden box. If exported to European countries, the wooden box will be fumigated. If the space of the container is limited, we will pack the box with PE film or pack it according to the requirements of the customers’.


  • Previous:
  • Next:

  • 标签:, , ,
    Write your message here and send it to us

    Leave Your Message

      * Name

      * Email

      Phone/WhatsAPP/WeChat

      * What I have to say


      Leave Your Message

        * Name

        * Email

        Phone/WhatsAPP/WeChat

        * What I have to say